Module Configuration and Parameter Chart

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
ABS module	760	Yes	Yes	IVD initialization	None
ACM	727	Yes	Yes	No	None
APIM	7D0	Yes	No	No	None
ATCM	792	No	No	No	None
AWD module	703	No	No	No	None
BCM	726	Yes	Yes	No	Battery type configuration
BECMB	723	Yes	No	No	None
CCM	764	Yes	No	No	None
DDM	740	Yes	Yes	Windows initialization	None
DSP	783	Yes	No	No	None
GSM	732	No	No	No	None
GWM	716	Yes	No	No	None
HVAC module	733	Yes	Yes	No	None
IPC	720	Yes	No	No	None
IPMA	706	Yes	No	Camera calibration	None
IPMB	7B1	Yes	No	Camera calibration	None
OCS module	765	No	No	OCS module re-zero	None
PAM	736	Yes	Yes	No	None
PCM	7E0	Yes	Yes	No	None
PDM	741	Yes	Yes	Windows initialization	None
PSCM	730	Yes	Yes	Drive the vehicle for at least 3 minutes, with straight driving above 50 km/h (30 mph) for at least 30 seconds.	None
RCM	737	Yes	Yes	No	None
RTM	751	Yes	No	No	None
SCCM	724	Yes	No	No	None
SODL	7C4	Yes	No	No	Blockage enable
SODR	7C6	Yes	No	No	Blockage enable
TCU	754	Yes	No	No	None
TRM	791	Yes	No	No	None
WACM	725	Yes	No	No	None