Module Configuration and Parameter Chart

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Programmable Parameters
ABS module	760	Yes	Yes	IVD initialization EPB apply and release	None
ACM	727	Yes	Yes	No	None
APIM	7D0	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
AWD module	703	Yes	Yes	No	None
BCM	726	Yes	Yes	Ambient lighting calibration Rear view camera calibration	None
CCM	764	Yes	Yes	Radar horizontal and vertical alignment calibration	None
DACMC (integrated with ACM)	7D5	Yes	Yes	No	Radio noise suppression
DCDC (VQM)	746	Yes	Yes	No	None
DDM	740	Yes	Yes	Windows initialization	None
DSM	744	Yes	Yes	No	None
DSP	783	Yes	Yes	No	None
GSM	732	Yes	Yes	No	None
GWM	716	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
HCM	734	Yes	Yes	LED Lamp Driver Module Initialization	None
HSWM	714	Yes	Yes	No	None
HVAC module	733	Yes	Yes	No	None
IPC	720	Yes	Yes	No	None
IPMA	706	Yes	Yes	Camera calibration	None
IPMB	7B1	Yes	Yes	Camera calibration	None
OCS module	765	No	No	OCSM re-zero	None
PAM (integrated with BCM)	736	Yes	Yes	No	None
PCM	7E0	Yes	Yes	Misfire Monitor Neutral Profile Correction procedure	None
PDM	741	Yes	Yes	Windows initialization	None
PSCM	730	Yes	Yes	No	None
RCM	737	Yes	Yes	No	None
RGTM	775	Yes	Yes	No	None
RTM	751	Yes	Yes	No	None
SCCM	724	Yes	Yes	No	None
SCME	776	Yes	Yes	No	None
SODL	7C4	Yes	Yes	No	None
SODR	7C6	Yes	Yes	No	None
TCU	754	Yes	Yes (diagnostic scan tool and USB flash drive)	No	None
TRM	791	Yes	Yes	No	None
WACM	725	Yes	Yes	No	None