Module Programming Menu
WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Module Programming is listed under the Toolbox tab after starting an IDS session with a vehicle. The module programming menu is disabled when a manual vehicle session is created.
The Module Programming menu has 4 selections:
- Programmable Module Installation (PMI)
- Module Reprogramming
- Programmable Parameters
- As-Built
These selections may not be present for all vehicles.