Rear View Mirrors
- Description And Operation
- Diagnosis And Testing
- Rear View Mirrors
- Diagnostic Trouble Code (DTC) Chart
- Global Customer Symptom Code (GCSC) Chart
- Symptom Chart(s)
- Pinpoint Tests
- Notes
- Pinpoint Test A: A Single Exterior Mirror Does Not Operate Correctly In All Directions
- Pinpoint Test B: One Or Both Heated Exterior Mirrors Are Inoperative Or Always On (Without Memory Mirrors)
- Pinpoint Test C: The Exterior Mirror Memory Recall Feature Is Inoperative/Does Not Operate Correctly
- Pinpoint Test D: One Or Both Exterior Mirrors Fold Inward Due To Wind Pressure
- Pinpoint Test E: Both Exterior Mirrors Are Inoperative (With Or Without Memory Mirrors)
- Pinpoint Test F: The Left Hand (LH) And Right Hand (RH) Heated Exterior Mirrors Do Not Defrost At The Same Rate
- Pinpoint Test G: An Exterior Mirror Selection Switch Light Emitting Diode (Led) Is Inoperative (Exterior Mirror Selection Switch Functions Normally)
- Pinpoint Test H: The Exterior Mirror Puddle Lamp Is Inoperative Or Always On
- Pinpoint Test I: The Exterior Mirror Turn Signal Is Inoperative Or Always On
- Pinpoint Test J: The Blind Spot Information System (BLIS)® Indicator Is Inoperative Or Always On
- Pinpoint Test K: The Interior Mirror Is Blemished
- Pinpoint Test L: The Interior Mirror Vibrates Or Is Loose
- Pinpoint Test M: Exterior Mirror Housing Vibrates Or Is Loose
- Pinpoint Test N: Exterior Mirror Glass Vibrates Or Is Loose
- Pinpoint Test O: Wind Noise
- Rear View Mirrors
- Removal And Installation