Power Mirrors Synchronization: Synchronization
NOTE:
The power folding mirrors may need to be synchronized any time the mirrors are folded or unfolded without using the folding switch, or if a new power folding mirror is installed.
NOTE:
The power telescoping mirrors may need to be synchronized any time the mirrors are extended or retracted without using the telescoping switch, or if a new power telescoping mirror is installed.
NOTE:
If the power folding or power telescoping mirrors are continuously electronically moved, the power lockout feature disables the system for approximately 3-10 minutes to prevent damage to the power fold or power telescope motors. After 3-10 minutes have elapsed, normal operation resumes.
NOTE:
The truck power folding mirror procedure and power telescoping mirror procedure are similar.
- Fold or retract both mirrors by hand.
- Using the power folding/power telescoping mirror switch, operate the mirrors until an audible click is heard.
- Operate the power folding or power telescoping mirrors an additional 3 to 4 times to synchronize the mirrors.