LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> GT >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Ignition >> Removal And Installation >> Ignition Coil-On-Plug >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil-On-Plug: Removal

NOTE: During the removal or installation of components, cap, tape or otherwise appropriately protect all openings and tubes/fittings to prevent the ingress of dirt or other contamination. Remove caps, tape and other protective materials prior to installation.

Right side 

  1. Remove the engine appearance cover retainers and then remove the engine appearance cover.
    GFD345070Courtesy of FORD MOTOR COMPANY
  2. Disconnect the ignition coil-on-plug electrical connectors.
    GFD345228Courtesy of FORD MOTOR COMPANY
  3. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
    NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

    1. Remove the ignition coil-on-plug retainers.
    2. Remove the ignition coil-on-plugs.

    GFD345229Courtesy of FORD MOTOR COMPANY

    Left side 

  4. Remove the engine appearance cover retainers and then remove the engine appearance cover.
    GFD345230Courtesy of FORD MOTOR COMPANY
  5. Disconnect the ignition coil-on-plug electrical connectors.
    GFD345231Courtesy of FORD MOTOR COMPANY
  6. NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.
    NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.

    1. Remove the ignition coil-on-plug retainers.
    2. Remove the ignition coil-on-plugs.

GFD345232Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals