Section 22 (Anti-Lock Brake System (Abs) And Stability Control)
WARNING: This page is about a different car, the 2024 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Description And Operation
- Anti-Lock Brake System (ABS) and Stability Control - Overview
- Anti-Lock Brake System (ABS) and Stability Control - System Operation and Component Description
- System Diagrams
- Network Message Chart
- Anti-Lock Brake System (ABS)
- Auto Hold
- Electronic Brake Force Distribution (EBD)
- Electronic Parking Brake (EPB) Features
- Emergency Brake Assist (EBA)
- Hill Start Assist
- Supplemental Braking Assist
- AdvanceTrac
- Roll Stability Control (RSC)
- Selectable Drive Modes
- Trail Control
- Trailer Sway Control
- MyKey® Interaction
- Stability-Traction Control Indicator (Sliding Car Icon)
- Stability-Traction Control Disabled Indicator (Sliding Car OFF Icon)
- Component Description
- Diagnosis And Testing
- Anti-Lock Brake System (ABS) and Stability Control
- Diagnostic Trouble Code (DTC) Chart
- Symptom Chart(s)
- Pinpoint Tests
- Pinpoint Test A: Abs (Anti-Lock Brake System) Module Low Voltage Concern
- Pinpoint Test B: Pcm Brake Pressure Sensor / Brake Pedal Position Sensor Correlation
- Pinpoint Test Ab: Wheel Speed Sensor Erratic Signal Faults
- Pinpoint Test Ch: The Auto Hold Feature Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Test E: Lost Communication With BCM (Body Control Module)
- Pinpoint Test F: U2001:00
- Pinpoint Test G: Abs (Anti-Lock Brake System) Battery Voltage Concerns
- Pinpoint Test H: C1020:00
- Pinpoint Test I: Hydraulic Pump Faults
- Pinpoint Test J: Brake Fluid Level
- Pinpoint Test K: Front Wheel Speed Sensor Electrical Faults
- Pinpoint Test L: Rear Wheel Speed Sensor Electrical Faults
- Pinpoint Test M: Abs (Anti-Lock Brake System) Module Communication Concern With Advanced Driver Assistance System (ADAS)
- Pinpoint Test N: Abs Module Communication Concern With HVAC Module
- Pinpoint Test O: The Abs (Anti-Lock Brake System) Warning Indicator Is Never Or Always On
- Pinpoint Test P: Abs (Anti-Lock Brake System) Module Internal Fault Concern
- Pinpoint Test Q: Abs (Anti-Lock Brake System) Module Configuration Concerns
- Pinpoint Test R: Abs (Anti-Lock Brake System) Module VIN (Vehicle Identification Number) Mismatch
- Pinpoint Test S: Stability System Active Too Long Concern
- Pinpoint Test T: Abs (Anti-Lock Brake System) Module Communication Concern With PSCM (Power Steering Control Module)
- Pinpoint Test U: Abs (Anti-Lock Brake System) Module Communication Concern With The Pcm (Powertrain Control Module)
- Pinpoint Test V: Abs (Anti-Lock Brake System) Module Communication Concern With The GSM (Gear Shift Module)
- Pinpoint Test W: Stability Control Sensor Signal Failure Faults
- Pinpoint Test X: Abs (Anti-Lock Brake System) Module Communication Concern With The IPMA (Image Processing Module A)
- Pinpoint Test Y: Electronic Brake Booster (Ebb) Motor Faults
- Pinpoint Test E: The Traction Control System Is Inoperative, Cannot Be Disabled Or Enabled - Vehicles With 2WD (Two-Wheel Drive)
- Pinpoint Test Ag: The Abs Module Does Not Respond To The Diagnostic Scan Tool
- Pinpoint Test Ab: Incorrect Wheel Speed Sensor Fault
- Pinpoint Test Ac: Brake Pressure Sensor Faults
- Pinpoint Test Ad: Stability Control Sensor Initialization Fault
- Pinpoint Test AE: Abs (Anti-Lock Brake System) Module Communication Concern With The IPC (Instrument Panel Cluster)
- Pinpoint Test AF: Brake Pedal Input Concern
- Pinpoint Test Ag: SELECTABLE Drive Mode Switch Fault
- Pinpoint Test Ah: Abs (Anti-Lock Brake System) False Activation, Abs (Anti-Lock Brake System) Too Sensitive, Or Abs (Anti-Lock Brake System) Activates On Normal Stop
- Pinpoint Test Ai: Ebb (Electric Brake Booster) Unit Internal Failure
- Pinpoint Test AJ: Brake Booster Vacuum Sensor Faults
- Pinpoint Test AK: Steering Wheel Position Sensor Faults
- Pinpoint Test Al: Tire Diameter Concerns
- Pinpoint Test Bx: Abs Module Communication Concern With The All-Wheel Drive (AWD) Control Module
- Pinpoint Test Ck: Abs Module Communication Concern With The IPMB
- Pinpoint Test BO: Control Module Improper Wake-Up Performance
- Pinpoint Test CB: Brake Booster Low Vacuum Fault
- Pinpoint Test V: No Power Brake Assist Or Excessive Power Brake Assist - Ebb System
- Pinpoint Test U: The SELECTABLE Drive Mode Feature Is Inoperative
- Anti-Lock Brake System (ABS) and Stability Control
- Removal And Installation