LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2024 >> Edge ST-Line >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Four-Wheel Drive Systems >> Removal And Installation >> All-Wheel Drive (AWD) Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All-Wheel Drive (AWD) Module: Installation

  1. To install, reverse the removal procedure.
    NOTE: Carry out the remaining steps only if installing a new AWD module.
  2. NOTE: The 16/17 -digit alpha numeric bar code is located on the label attached to the Rear Drive Unit (RDU).

    Using the scan tool, configure RDU bar code to AWD module through the OBD port.

  3. Using a diagnostic scan tool, complete the PMI process for the AWD module following the on-screen instructions.