Section 1 (OEM Color Coding): Procedures
WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2023 Lincoln Navigator, 2023 Lincoln Nautilus, 2023 Lincoln Corsair, 2023 Lincoln Aviator, and 2023 Ford Transit-350 HD. However, it is still accessible from the selected car via links, so may be relevant.
A video of this procedure is available at
multimedia:A supplement to the article is available.
Illustrations in this service information may be used instead of written step instructions. Color-coding (see color scheme illustration) is used to communicate the required step action or actions. Service action icons may be used to add information regarding the required action.
| 1 | Blue - Target or primary component to be removed/installed (or disassembled/assembled). |
| 2 | Green - Components that need to be removed prior to or installed after the target/primary. |
| 3 | Brown - Components that need to be removed prior to or installed after the target/primary. |
| 4 | Yellow - Components to be set aside for access, but not removed. Also highlighted areas to inspect or adjust. |
| 5 | Magenta - Electrical connectors and fasteners such as nuts, bolts, clamps, or clips to be: detached, attached, loosened, moved, removed or installed. |
| 6 | Pale Blue - Special tool(s), general equipment, or common tools used in an uncommon way. |
Other color coding
- Alternating Blue and White
- Chemical, adhesive or sealer apply areas
- Red
- Sectioned or cut-away areas
- Grey
- Background components shown for location information