Ignition Switch: Service and Repair

KEY/LOCK CYLINDER

REMOVAL
1. Remove the securing cover for the central electronics.
2. Remove the steering column shroud.





3. Remove the transponder coil off the ignition lock (Fig. 3).
4. Insert the key into the ignition lock.





5. Turn the ignition key to the first detent (Fig. 4).





6. Turn the cap a � turn to the left (Fig. 5).





7. Remove cap together with the lock cylinder off the ignition lock (Fig. 6).

INSTALLATION
1. Install the cap together with the lock cylinder onto the ignition lock (Fig. 6).
2. Turn the cap a � turn to the right.
3. Turn the ignition key to the first detent (Fig. 4).
4. Remove the ignition key from the ignition lock.
5. Install the transponder coil onto the ignition lock (Fig. 3).
6. Install the steering column shroud. Pay attention to the cables routed under the steering column cover. Do not trap the cables.
7. Install the cover for the central electronics.