Removal & Installation

WARNING: This page is about the Magnavan Automatic Trans, Trans Mfr CD 400/M40, which is a different variant/trim than selected.

TRANS ID - 250, 250C, 350, 350C

Applies To	Standard Hours	Warranty Hours	Skill Level
G3500,RWD	3.1	2.3	C
Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation:
w/Catalytic Converter add	0.4		C
Combination Procedure: CONVERTER: Drain & Test:
	0.2		C
Combination Procedure: DIRECT & FORWARD CLUTCH: Remove & Replace:
Direct & Forward Clutch	2.1		A
Combination Procedure: EXTENSION HOUSING: Remove & Replace:
	0.2		B
Combination Procedure: FLYWHEEL: Remove & Replace:
V8	0.3		C
Combination Procedure: INTERMEDIATE CLUTCH ACCUMULATOR: Remove & Replace:
Intermediate Clutch Accumulator	0.2		A
Combination Procedure: LOW & REVERSE CLUTCH PISTON: Remove & Replace:
Low & Reverse Clutch Piston	2.6		A
Combination Procedure: OUTPUT SHAFT: Remove & Replace:
	2.2		B
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
	0.1		C
Combination Procedure: TRANS OIL PUMP: Overhaul Removed:
250,250C	0.3		B
350,350C	0.5		B
Combination Procedure: TRANS OIL PUMP: Remove & Replace:
Front Pump	0.5		B
Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace:
	0.3		B
Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace:
Front	0.2		B
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
	0.6		C

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		3.2	2.4	C