Removal (Pickup)
- Disconnect negative battery cables. Remove intake manifold. Install Screens (J-29664-1) in cylinder heads. Remove fuel injection lines. Disconnect throttle cable and detent cable (if equipped). Disconnect wiring, fuel return line, fuel supply line, and fuel injection lines at pump. Cap all openings.
- Remove A/C hose retainer bracket (if equipped). Remove oil filler tube and vent hose assembly. Remove grommet. Scribe or paint an alignment mark on front cover and injection pump.
- Rotate engine to remove injection pump retaining bolts that are accessible through oil filler neck hole. Remove injection pump mount nuts. Remove injection pump and gasket.