Vent/Window Run Channel Assembly: Notes

CAUTION: When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener needs to be replaced, use the correct part number fastener for that application. If the correct part number fastener is not available, a fastener of equal size and strength (or stronger) may be used. Fasteners that are not reused, and those requiring locking compound will be called out. The correct torque value must be used when installing fasteners that require it. If the above conditions are not followed, parts or system damage could result.

NOTE: Numbers in parenthesis refer to numbers in illustration.

NOTE: The body vent and front window run channel are one assembly. This assembly fits into the front of the door frame.