Removal & Installation
WARNING: This page is about the Sonoma Base, 2D Pickup, 2.5 A, Automatic, which is a different variant/trim than selected.
TRANS ID - 700-R4, 4L60, 4L60E, 4L65E, 4L70E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| RWD,In-Line4,Trans Mfr CD 4L60/MD8, w/o Skid Plate | 3.8 | C | ||
| RWD,In-Line4,Trans Mfr CD 4L60/MD8, w/Skid Plate | 4.0 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANS OIL PUMP: Overhaul Removed: | ||||
| 0.5 | B | |||
| Combination Procedure: TRANS OIL PUMP: Remove & Replace: | ||||
| 1.1 | B | |||
| Combination Procedure: TRANS OIL PUMP BUSHINGS & SEAL: Remove & Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace: | ||||
| 0.2 | B | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| 0.6 | C | |||
| Combination Procedure: TRANSMISSION HOUSING: Remove & Replace: | ||||
| 3.6 | A | |||