Switch/Operates Okay From Left Window Switch
- Turn ignition switch to RUN position. Connect test light between ground and Yellow wire at right window switch connector. If test light illuminates, go to next step. If test light does not illuminate, repair open in Yellow wire.
- Connect test light between right window switch connector Dark Blue and Brown wires. Operate window between UP and DOWN positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, check window switch for poor connection. If connection is okay, replace right window switch.
- Connect test light between right window motor connector Dark Blue and Brown wires. Operate window switch between UP and DOWN positions. If test light illuminates in both positions, check right window motor for poor connection. If connection is okay, replace right window motor. If test light does not illuminate in both positions, repair open in Dark Blue or Brown wires between right window switch and right window motor.