Left Window Inoperative/Right Window Operates Okay
- Turn ignition switch to RUN position. Connect test light between left door lock and side window switch 8-pin connector C2, terminals "A" (Dark Blue wire) and "E" (Brown wire). Observe test light and operate switch between UP and DOWN positions. If test light illuminates in both positions, go to next step. If test light does not illuminate in both positions, check left door lock and side window switch for poor terminal contact. If connection is okay, replace left door lock and side window switch.
- Connect test light between left window regulator motor connector terminals "B" (Dark Blue wire) and "A" (Brown wire). Observe test light and operate switch between UP and DOWN positions. If test light illuminates in both positions, check left window regulator motor connector for poor terminal contact. If connection is okay, replace left window regulator motor. If test light does not illuminate in both positions, repair open in Dark Blue or Brown wire between left door lock and side window switch and left front window regulator motor.