LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1998 >> Jimmy 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> TBC/BCM Relearn Procedure >> Body Control Module >> Relearn Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relearn Procedures

  1. Turn ignition off. Replace failed/affected component.
  2. Turn ignition switch to RUN position, then to CRANK position (without starting engine), then back to RUN position.
  3. Observe SECURITY indicator light on dash for 10 minutes. After 10 minutes, indicator light will turn on, then off.
  4. Repeat steps 2) and 3) twice. After successfully completing 3 consecutive cycles of ignition switch, vehicle will learn the new component on the next ignition cycle, which is from OFF to CRANK then to RUN position. Engine should start.
  5. After performing relearn procedures, clear DTCs. See CLEARING DTCS  under SELF-DIAGNOSTIC SYSTEM.
scientia non olet · About LEMON Manuals