LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Tests >> Ignition System >> Timing Control Systems >> Knock Sensor Circuit (Models Using Knock Sensor With Internal Spark Controller Module)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor Circuit (Models Using Knock Sensor With Internal Spark Controller Module)

  1. An open or short circuit on knock sensor wire to PCM will set a related DTC. A false detonation signal will not cause PCM to set a DTC.
  2. Install scan tool. Using a metal object, tap on engine next to knock sensor and note knock parameter. Knock should be indicated on scan tool.
  3. If a scan tool is not available, connect tachometer to engine. Start engine and hold RPM above idle. Using a metal object, tap on engine close to knock sensor. A noticeable decrease in engine RPM should occur. If no RPM decrease occurred, check knock sensor-to-PCM circuit.
  4. On vehicles equipped with automatic transmission, it may be necessary to place transmission in Drive for timing change to occur.
scientia non olet · About LEMON Manuals