LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> Envoy >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Controls - Self-Diagnostics) >> Drive Cycles >> Inspection/Maintenance System Check >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection/Maintenance System Check: Procedure

WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Many DTC related repairs will instruct the technician to clear the DTC information. This procedure will reset ALL of the I/M System Status indicators to NO, and require performing the I/M Complete System Set Procedure.
  1. Did you perform the Diagnostic System Check-Engine Controls? If yes, go to next step. If no, see DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM. Repair any DTCs or driveability concerns that would prevent the I/M System Status tests from completing. Did you find and repair a DTC or driveability concern? If yes, go to step  3. If no, go to next step.
  2. Review any service bulletins for software updates that may prevent I/M readiness. Perform any reprogramming or repairs indicated by the service bulletins. Was a reprogramming or repair service required? If yes, see INSPECTION/MAINTENANCE COMPLETE SYSTEM SET PROCEDURE . If no, go to next step.
  3. With a scan tool, observe the I/M SYSTEM STATUS display. Is more than one test indicating a NO status? If yes, see INSPECTION/MAINTENANCE COMPLETE SYSTEM SET PROCEDURE . If no, go to the I/M SYSTEM SET PROCEDURE for the indicated system.
scientia non olet · About LEMON Manuals