Engine Assembly (Complete): Remove & Replace
WARNING: This page is about the Yukon Base, 4.8 V, 4WD, which is a different variant/trim than selected.
Includes: R&I Engine Assembly. Transfer Fuel and Electrical Assemblies and Engine Mounts.
DOES NOT include transfer of Manifolds, Valve Cover(s), Timing Cover(s), Oil Pan and/or Water Pump.
NOTE: For bare Engine, refer to Long Block - R&R.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base, w/o Secondary Air Injection | Includes: Transfer all necessary parts to GM exchange Engine. Includes: Recover, Evacuate and Recharge Air Conditioning System. | 15.9 | B | |
| Base, w/Secondary Air Injection | Includes: Transfer all necessary parts to GM exchange Engine. Includes: Recover, Evacuate and Recharge Air Conditioning System. | 17.4 | B | |
| Additional Procedure: ENGINE ASSEMBLY (COMPLETE): Remove & Replace: | ||||
| Base, w/Auxiliary Trans Cooler add | 0.4 | B | ||
| w/Skid Plate add | 0.3 | B | ||
| Where Engine Oil Cooler interferes add | 0.4 | B | ||