LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> Yukon Denali >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Body Control Module (BCM) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

  1. Disconnect negative battery cable. Remove left instrument panel trim panel. Apply parking brake. Shift transmission to first gear (automatic transmission only). Tilt steering wheel to full down position. Pull rearward gently on instrument panel bezel. Set instrument panel bezel aside.
  2. Remove knee bolster screws. Unsnap knee bolster and set aside. Disconnect Brown BCM connector first. Remove remaining BCM connectors. Remove BCM from sliding bracket.
  3. To install, slide BCM into bracket. Reconnect all connectors EXCEPT Brown BCM connector. Reconnect Brown BCM connector last. To complete installation, reverse removal procedure. To reprogram BCM, see PROGRAMMING .
scientia non olet · About LEMON Manuals