Installation Procedure
- Install the injection lines at the pump. Refer to Fuel System Description .
- Uncap the lines and pump fittings.
- Refer to the tags for the correct installation.
- Install the injection lines at the nozzles.
NOTE: Refer to FASTENER NOTICE . - Uncap the lines and the nozzles.
Tighten
Tighten the fittings to 25 N.m (18 lb ft).
- Install the injection line clips at the loom brackets.
- Remove the J 39664 manifold cover set.
- Install the intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT - UPPER and INTAKE MANIFOLD REPLACEMENT - LOWER .
- Install the negative battery cables.