Engine Will Not Run
- Drain the fuel tank. Refer to Fuel Tank Draining Procedure .
- Fill the fuel tank to 1/4 with diesel fuel.
- Remove the ECM 1 fuse from the underhood relay center.
- Install a hose from the fuel injection pump inlet hose (hose to hose) at the fuel injection pump to a closed metal container with a capacity of at least 8 liters (2 gallons).
- Crank the engine for 15 seconds with one minute cooling periods to purge the gasoline from the system.
- Reinstall the inlet hose to the injection pump.
- Install the ECM 1 fuse in the underhood relay center.
- Start the engine.
Important: Check for leaks.
- Run the engine for 15 minutes.
- Clear the engine DTCs.