Knee Bolster: Installation
- Install the knee bolster trim panel to the vehicle. Install the screws that retain the knee bolster trim panel to the instrument panel. Tighten the Torx® screws to 80 INCH lbs. (9 N.m). Tighten the hex head screws to 17 INCH lbs. (1.9 N.m).
- Install the screw that retains the courtesy light to the knee bolster. See Figure. Install the parking brake release cable to the parking brake lever.
- Install the lower instrument panel sound insulator. See LOWER INSULATOR PANEL . Install the left-side instrument panel sound insulator. See LEFT INSULATOR PANEL .