Powertrain Control Module Programming: Notes

NOTE: If replacing PCM, the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into PCM to prevent DTCs from being stored in Controller Anti-Lock Brake (CAB) module and Air Bag Control Module (ACM). If replacing PCM on models equipped with a Sentry Key Immobilizer Module (SKIM), the secret key data must also be updated to enable engine starting.

Connect scan tool to Data Link Connector (DLC) located below left side of instrument panel. Using scan tool, enter correct VIN and mileage into PCM. Using scan tool manufacturer's instructions, clear DTCs from CAB module and ACM.