LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Replacement Procedures >> Starter Motor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Motor: Installation

  1. Connect the wires to the solenoid. Tighten the battery positive cable nut and the engine wiring harness to starter nut to specifications. See TORQUE SPECIFICATIONS .
  2. Install the starter and the inboard starter mounting bolt. Do not tighten. Install the starter shims, if equipped. Install the outboard starter mounting bolt. Tighten the starter mounting bolts to specifications. See TORQUE SPECIFICATIONS .
  3. Install the differential carrier shield, if equipped. Install the differential carrier shield mounting bolts. Tighten the differential carrier bolts to specifications. See TORQUE SPECIFICATIONS .
  4. Lower the vehicle. Connect the battery negative cable. Tighten battery cable to specifications. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals