LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - 4.3L >> Fuel Systems >> Fuel System Cleaning >> Cleaning Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cleaning Procedures

  1. Disconnect negative battery cable.
  2. Relieve fuel system pressure. Refer to FUEL SYSTEM PRESSURE RELEASE under FUEL SYSTEMS in BASIC DIAGNOSTIC PROCEDURES - 4.3L ASTRO, BLAZER, JIMMY CANADIAN, SAFARI, SONOMA & S10 PICKUP article.
  3. Drain fuel tank.
  4. Remove fuel tank.
  5. Remove fuel sender assembly.
  6. Inspect fuel strainer. Replace a contaminated strainer and inspect fuel pump.
  7. Inspect fuel pump inlet for dirt and debris. Replace fuel pump if you find dirt or debris in fuel pump inlet.
    8. NOTE: When flushing fuel tank, handle fuel and water mixture as a hazardous material. Handle fuel and water mixture in accordance with all applicable local, state and federal laws and regulations.
  8. Flush fuel tank with hot water.
  9. Pour water out of fuel sender assembly opening.
  10. Rock the tank to be sure that removal of the water from tank is complete.
  11. Inspect the in-line fuel filter for contamination.
  12. Replace fuel filter, if plugged.
scientia non olet · About LEMON Manuals