Installation Procedure

Fig 1: Disassembling/Assembling Air Cleaner Housing

Courtesy of GENERAL MOTORS CORP.

Install the air cleaner element (6) onto the air outlet duct (3) with a twisting and pushing motion.
Install the air cleaner element (6) and air outlet duct (3) into the lower air cleaner housing/washer solvent tank assembly (4).

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Ensure the air inlet duct (5) is properly positioned in the lower air cleaner housing/washer solvent tank assembly (4) before installing the air cleaner housing (2).

Install the air cleaner housing (2).
Tighten: Tighten the 3 air cleaner housing retaining screws (1) to 4 N.m (35 lb in).

Fig 2: Disconnecting/Connecting AIR Pump Inlet Hose From Air Cleaner

Courtesy of GENERAL MOTORS CORP.

Connect the AIR pump inlet hose to the air cleaner air outlet duct.
Install the radiator support diagonal brace if applicable. Refer to Brace Replacement - Radiator Support Diagonal in Body Front End.