Removal Procedure
- Remove the radiator support diagonal brace if applicable. Refer to Brace Replacement - Radiator Support Diagonal
in Body Front End.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the secondary air injection (AIR) reaction pump inlet hose from the air cleaner air outlet duct.
Courtesy of GENERAL MOTORS CORP.
- Loosen the 3 air cleaner housing retaining screws (1).
- Remove the air cleaner housing (2).
- Lift the air cleaner element (6) and air outlet duct (3) from the lower air cleaner housing/washer solvent tank assembly (4).
- Remove the air cleaner element (6) from the air outlet duct (3) with a twisting and pulling motion.
- Inspect the entire assembly for dust, debris, or water. Clean or replace as necessary.