LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Envoy RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.2L (Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Fuel Tank Module
    GM734434Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel pump electrical connector.
  3. Remove the retaining clip from the fuel level sensor connector.
  4. Disconnect the electrical connector from under the fuel sender cover.
  5. Remove the sensor retaining clip.
  6. Squeeze the locking tangs and remove the fuel level sensor (3).