LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (Utility/Crew Cab) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Relieve the fuel pressure. Refer to Fuel Pressure Relief Procedure .
  3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure (2-Door Utility) .
  4. Remove the fuel tank. Refer to Fuel Tank Replacement (Pickup) , Fuel Tank Replacement (2-Door Utility)  or Fuel Tank Replacement (4-Door Utility) .
    5. Fig 1: View Of Fuel Tank Pressure Sensor
    GM64998Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the fuel tank pressure sensor electrical connector.
  6. Remove the fuel tank pressure sensor (1) from fuel sender assembly (2)
scientia non olet · About LEMON Manuals