LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.3L (Introduction) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gauges, and Console.
    2. Fig 1: View Of Accelerator Cable At Accelerator Pedal
    GM424544Courtesy of GENERAL MOTORS CORP.
  2. Lift upward on the accelerator pedal in order to relieve tension on the cable.
  3. Remove the retainer from the pedal lever hole by compressing the tabs on the retainer.
    4. Fig 2: Locating Accelerator Pedal Assembly Components
    GM350251Courtesy of GENERAL MOTORS CORP.
  4. Remove cable from the slot in the pedal lever (1).
  5. Remove the accelerator pedal mounting nuts (2).
  6. Remove the accelerator pedal assembly.
scientia non olet · About LEMON Manuals