LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Place a drain pan under the vehicle.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls 4.3L.
  3. Remove the power steering pump pulley. Refer to Power Steering Pulley Replacement .
  4. Fig 1: View Of Power Steering Pressure Hose At Power Steering Gear
    GM395770Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the power steering pressure hose from the power steering gear.
  6. Fig 2: View Of Power Steering Cooler Hose At Power Steering Pump
    GM395852Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the power steering cooler hose from the power steering pump.
  8. Fig 3: View Of Air Reactor Pipe
    GM740899Courtesy of GENERAL MOTORS CORP.
  9. Disconnect the air reactor tube from the lower reactor tube.
  10. Remove the air reactor pipe lower retaining nut.
  11. Disconnect the air reactor pipe from the check valve and remove reactor pipe.
  12. Fig 4: View Of Power Steering Pump Filler Neck Tube
    GM288836Courtesy of GENERAL MOTORS CORP.
  13. Remove the power steering pump filler neck tube mounting bolt.
  14. Remove the power steering pump filler neck tube.
  15. Fig 5: Locating Power Steering Rear Mounting Bracket Nut At Engine Stud
    GM288833Courtesy of GENERAL MOTORS CORP.
  16. Remove the power steering rear mounting bracket nut from the engine stud.
  17. Fig 6: Locating Power Steering Pump Front Mounting Bolts
    GM288829Courtesy of GENERAL MOTORS CORP.
  18. Remove the power steering pump front mounting bolts.
  19. Fig 7: View Of Power Steering Pump Bracket
    GM340090Courtesy of GENERAL MOTORS CORP.
  20. Loosen the accessory mounting bracket bolts and nuts and pull accessory mounting bracket forward.
  21. Remove the power steering pump and power steering pressure hose from the vehicle.
  22. IMPORTANT: Note the position of the power steering pressure hose to the power steering pump to ensure proper installation to the vehicle.
  23. Remove the power steering pressure hose from the power steering pump.