Removal Procedure
- Disconnect the negative battery cable.
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
- Drain the fuel tank. Refer to Fuel Tank Draining Procedure (2-Door Utility) .
- Remove the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility) or Fuel Tank Replacement (4-Door Utility) .
- Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement (Utility/Crew Cab) .
- Note the position of the fuel strainer (2) on the fuel sender.
- Support the fuel sender assembly with one hand and grasp the strainer (2) with the other hand.
- Pull the strainer off the fuel sender. Discard the strainer after inspection.
- Inspect the strainer. Replace a contaminated strainer and clean the fuel tank.
CAUTION:
Refer to the Battery Disconnect Caution in Cautions and Notices.