LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2005 >> Jimmy Part Time, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Body Control Module
    GM239852Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The ignition switch should be in the OFF position when connecting or disconnecting the connectors to the body control module (BCM). Always disconnect the Brown BCM connector FIRST and connect the Brown BCM connector LAST. The BCM can set DTCs with the ignition switch in the OFF position.
  1. Remove the left instrument panel (I/P) sound insulator from the vehicle. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Remove the lower I/P sound insulator from the vehicle. Refer to Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower in Instrument Panel, Gages and Console.
  3. Disconnect the electrical connectors from the BCM.
  4. Bend the 2 snap retainers back slightly and pull the BCM from the bracket at an angle.
scientia non olet · About LEMON Manuals