Removal Procedure

Fig 1: Locating Air Cleaner Outlet Retaining Nut

Courtesy of GENERAL MOTORS CORP.

Remove the air cleaner assembly (2) and nut (1). Refer to Air Cleaner Assembly Replacement .
Disconnect the electrical connectors.
Remove the ignition coil wire to the distributor.

Fig 2: View Of Accelerator Cable Bracket

Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Ignition Coil, Bracket & Studs

Courtesy of GENERAL MOTORS CORP.

Remove the studs holding the bracket and the ignition coil to the intake manifold.
Remove the bracket and the ignition coil.
Drill and punch out the two rivets holding the ignition coil to the bracket.
Remove the ignition coil from the bracket.