LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Filler Tube Replacement (2-Door Utility) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating Fuel Fill Hose Clamp & Vent Hose Clamp
    GM617013Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  3. Raise the vehicle.
  4. Wipe the vent hose connection at the fuel tank and then disconnect the vent hose and clamp (1).
  5. Wipe the fuel filler hose connection at the fuel tank and then disconnect the fuel filler hose and clamp (2).
    6. Fig 2: Locating Filler Pipe Components (2-Door Utility)
    GM617017Courtesy of GENERAL MOTORS CORP.
  6. Remove the filler pipe ground strap bolt (4).
    7. Fig 3: View Of Filler Tube (Pickup)
    GM617004Courtesy of GENERAL MOTORS CORP.
  7. Remove the fuel fill pipe to fill pipe housing attaching screws.
  8. Remove the fuel fill and vent pipes and hoses.
scientia non olet · About LEMON Manuals