LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (Rear) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating Fuel Filter & Fuel Lines
    GM255018Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the fuel and evaporative emission (EVAP) pipes.
  2. Connect the rear fuel return pipe to the chassis fuel return pipe (2).
  3. Connect the rear fuel feed pipe to the fuel filter inlet.
  4. Install the fuel feed and return pipes into the retainers.
  5. Install the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility)  or Fuel Tank Replacement (4-Door Utility) .
  6. Lower the vehicle.
  7. Refill the fuel tank.
  8. Tighten the fuel filler cap.
  9. Connect the negative battery cable.
  10. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals