Removal Procedure
- Disconnect the negative battery cable.
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
- Drain the fuel tank. Refer to Fuel Tank Draining Procedure (2-Door Utility) .
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Clean all the fuel pipe connections and the surrounding areas before disconnecting in order to avoid possible contamination of the fuel system.
- Remove the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility) or Fuel Tank Replacement (4-Door Utility) .
- Disconnect the rear fuel feed pipe from the fuel filter inlet.
- Disconnect the rear fuel return pipe from the chassis fuel return pipe (2).
- Remove the fuel feed and return pipes from the retainers.
- Cap the fuel pipes in order to prevent possible fuel system contamination.
CAUTION:
Refer to Battery Disconnect Caution in Cautions and Notices.