LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Fuel Pressure Regulator Replacement (4.3L (RPO LU3) Engine) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Fuel Meter Body Assembly Components
    GM821586Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper intake manifold. Refer to Intake Manifold Replacement - Upper in Engine Mechanical-4.3L.
  2. Remove the fuel pressure regulator retainer clip (5).
  3. Twist and pull the fuel pressure regulator (6) in order to remove the regulator from the housing using a shop towel to catch any spilled fuel.
  4. Remove and discard the regulator seal O-ring (10).
  5. Remove and discard the regulator filter (9).
  6. Remove and discard the regulator seal O-ring (8).
  7. Remove and discard the backup ring (7).
  8. Cover the fuel pressure regulator housing to prevent contamination from entering the fuel system.
scientia non olet · About LEMON Manuals