Rear Toe Adjustment

Fig 1: Identifying Adjuster Nut

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Make any adjustments to camber before setting toe.

IMPORTANT: Left side toe adjustment is shown, right side toe adjustment is similar.

Loosen the adjuster nut (1).
Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
NOTE: Refer to Fastener Notice .

IMPORTANT: Ensure that the toe settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.
Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
Tighten: Tighten the nut to 140 N.m (103 lb ft).
Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
Test drive the vehicle.