Front Toe Adjustment

Remove the power steering gear seal small clamps.
Verify that the steering wheel is centered and the wheels are in the straight ahead position.

Fig 1: Identifying Tie Rod & Jam Nut

Courtesy of GENERAL MOTORS CORP.

Loosen the left and right tie rod jam nuts (2).
IMPORTANT: Verify that the number of threads showing on both inner tie rod ends are approximately equal.
Rotate the inner tie rods in order to obtain the proper toe angle of 0 degrees.
NOTE: Refer to Fastener Notice .
Tighten the tie rod end jam nuts.
Tighten: Tighten the left and right tie rod jam nuts (2) to 68 N.m (50 lb ft).

IMPORTANT: Verify that the power steering gear seal is not twisted.
Install the power steering gear seal small clamps.