Removal & Installation
WARNING: This page is about the Yukon Base, 4WD, which is a different variant/trim than selected.
TRANS ID - 6L50, 6L80E, 6L90E
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Base,4WD, w/o Skid Plate | 7.7 | C | ||
| Base,4WD, w/Skid Plate | 8.0 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Base | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Base | 0.3 | C | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Base | 0.1 | C | ||
| Combination Procedure: TRANS OIL PUMP SEAL: Remove & Replace: | ||||
| Base | 0.2 | B | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| Base,4WD | 4.0 | A | ||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| Base,4WD | 0.3 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Base | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| Base | 1.6 | B | ||