Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Yukon SLE, 4WD, which is a different variant/trim than selected.
TRANS ID - 6L50, 6L80E, 6L90E
Includes: Inspect and replace all necessary components, clean and check Converter, flush Oil Cooler Lines, adjust and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 4WD, w/o Skid Plate | Includes: Programming. | 16.0 | 10.7 | A |
| 4WD, w/Skid Plate | Includes: Programming. | 16.3 | 10.7 | A |
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.3 | C | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Overhaul: | ||||
| 4.0 | A | |||
| Combination Procedure: TRANSFER CASE ASSEMBLY: Replace: | ||||
| 0.3 | C | |||