Removal & Installation
WARNING: This page is about the Canyon Base, 4D Pickup Crew Cab, 2.5L Eng VIN A, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 2.5L Eng,Automatic Trans,RWD | Includes: Confirm Fluid temperature for level check. | 6.6 | C | |
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| 2.5L Eng, Rear | 0.5 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 2.5L Eng | 0.3 | C | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||
| Combination Procedure: TRANSMISSION OIL PUMP: Remove & Replace: | ||||
| 6 Spd Trans | 1.6 | B | ||
| Combination Procedure: TRANSMISSION OIL PUMP SEAL: Remove & Replace: | ||||
| 6 Spd Trans, Front | 0.2 | B | ||