Remote Control Door Lock Receiver Replacement

Fig 1: Remote Control Door Lock Receiver

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the center reading and courtesy lamp assembly to gain access to the receiver. Refer to Center Reading and Courtesy Lamp Replacement .
1	Remote Control Door Lock Receiver Procedure Disconnect the electrical connector and the remote control door lock receiver antenna. Release two tabs and slide the receiver rearward to release from bracket attached to headliner. For programming and set up, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the center reading and courtesy lamp assembly to gain access to the receiver. Refer to Center Reading and Courtesy Lamp Replacement .

Remote Control Door Lock Receiver

Procedure

Disconnect the electrical connector and the remote control door lock receiver antenna.
Release two tabs and slide the receiver rearward to release from bracket attached to headliner.
For programming and set up, refer to Control Module References .