Circuit/System Verification
NOTE:
An invalid data DTC is normally set along with another DTC or symptom. Diagnose other DTCs and/or symptoms before replacing any device.
- Engine running for 10 s.
- Ignition ON, engine OFF, verify DTC U2500-U25FF is not set.
- If DTC U2500-U25FF is set along with other DTCs set
Diagnose all other DTCs first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If DTC U2500-U25FF is set without other DTCs set
- Program the device specified by the DTC descriptor.
- Verify the DTC does not set.
- If the DTC sets, replace the appropriate device.
- If the DTC does not set
- All OK.
- If DTC U2500-U25FF is not set
- If DTC U2500-U25FF is set along with other DTCs set
- All OK