Installation Procedure
- Install Wheel Speed Sensor (1)
- Install and tighten Wheel Speed Sensor Bolt (1) to 9 N.m (80 lb in)
- Secure Retainer (1) @ Knuckle
- Secure Retainers (1) (Qty: 2) @ Rear Toe Link
- Secure Retainer (2) @ Rear Toe Link Bracket
- Connect Wheel Speed Sensor Electrical Connector (1)
- Secure Retainer (2) @ Rear Cradle
- Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation
- Verify the repair is complete. Refer to Diagnostic Repair Verification
CAUTION:
Refer to Fastener Caution