LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2017 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 239 (Object Detection System) >> Diagnostic Information and Procedures >> DTC B094B or B094C: Left Side Object Detection Control Module/Right Side Object Detection Control Module >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify that B094B 45 or B094C 45 is not set.
    • If DTC is set 
    1. Program the appropriate B218 Side Object Sensor Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the appropriate B218 Side Object Sensor Module.
      • If the DTC does not set
    3. All OK.
    • If DTC is not set 
  3. Verify that B094B 00, B094C 00, B094B 08, B094C 08, B094B 54 or B094C 54 is not set.
    • If DTC is set 

      Replace the appropriate B218 Side Object Sensor Module.

    • If the DTC is not set 
  4. Verify that B094B 58 or B094C 58 is not set.
    • If DTC is set 

      Verify the area in front of the sensor is clean, unobstructed, and damage-free.

    • If not clean, unobstructed, and damage-free, clean or repair as necessary.
    • If clean, unobstructed, and damage-free, replace the appropriate B218 Side Object Sensor Module.
    • If DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals