Unsuccessful Programming Recovery

In the event of an interrupted or unsuccessful programming event, perform the following steps:

1. Ignition ON. Ensure the B218L Side Object Sensor Module - Left, DLC and programming tool connections are secure and the SPS software is up to date.
2. Verify the B218L Side Object Sensor Module - Left can be reprogrammed.
   • If the B218L Side Object Sensor Module - Left cannot be reprogrammed 
   1. Ignition OFF for one minute, ignition ON.
   2. Verify the B218L Side Object Sensor Module - Left can be reprogrammed.
      • If the B218L Side Object Sensor Module - Left cannot be reprogrammed, replace the B218L Side Object Sensor Module - Left.
      • If the B218L Side Object Sensor Module - Left can be reprogrammed.
   3. All OK.
   • If the B218L Side Object Sensor Module - Left can be reprogrammed 
3. All OK.